COMPLETE JET DRIVE TOOL KIT
TOP ROW, LEFT TO RIGHT:
1- Impeller socket $71.00
2- Impeller puller $139.00
3- Shaft spline socket $57.00
1- Suction housing seal driver $21.50
2- Bearing cap seal driver $18.50
3- Bowl seal driver (black) $16.50
4- Bowl bearing driver (silver) $22.00
5- Inter-changeable driver shaft $26.50
This kit includes everything you need to rebuild your jet drive. If your impeller is frozen onto your impeller shaft, the impeller puller is a must have tool. Three jaw pullers will not do the job in most cases. This puller grabs a full 360 degrees around the impeller hub slot for a strong even pull.
This kit comes with the seal and bowl bearing drivers that thread onto an interchangeable driver shaft. Also included in the kit is an impeller nut socket size 1-13/16” x ½” drive and a spline socket that fits your shaft to hold it properly while removing the impeller nut.
Please, don’t be one of those back yard “hacks” that put a pipe wrench on the spline end of the impeller shaft. This will damage the splines to the point where the shaft will not move freely in the drive joint spline yoke. This will create big problems for your set up down the road. I can’t tell you how many jets I have built with this problem, created by someone who messed with the jet before it was sent to me. The kit also has the proper seal drivers along with a bowl bearing driver which threads directly onto the inter-changeable driver shaft.
"This kit is a nice set up but you can purchase these pieces individually or in sub kits if you choose to do it that way. If you are a do it yourself-er, do it right and have fun. The work is much easier with the right tools."
COMPLETE JET DRIVE TOOL KIT $345
Seal Driver Set $79
Bowl bearing driver set $48
Impeller Nut and Shaft Socket Set $125