Performance Jet -Jet Boat High Performance Design

Throughout the years, Performance Jet has accumulated numerous used jet drives and jet drive parts. When I have the time, during the slow months of the year, I will sometimes spend time cleaning and refurbishing jet parts for resale. These parts are stripped, primed, repainted and brought back to original spec or better.

In this way, I can provide jet drives and related parts to customers at a reasonable savings. These parts are limited to stock on hand and at this time I have Berkeley Jets, Panther Jets and Jacuzzi Jets available. I also have Berkeley 12JC bowls and 12 JG bowls on the shelf. Drop me a line if you are looking for a savings with used parts or jets.

Jim at work on "The Bench."

Stuffer Plate, Billet Inducer & Billet Impeller
Ready for Assembly

2009 Special Completely Refurbished
Berkeley 12C Jet Drive

Includes:

Parts stripped, re-primed and painted.
Built to Level II specifications. Radial and Axial clearances set.
Aggressor A/B aluminum impeller with shouldered wear ring.
Suction case smoothed, re-primed and painted.
Front side of bowl sharpened, contoured and Flow coated.
Low friction graphite packing, Billet impeller nut, tail bearing cone.

This jet is a great unit for the lake boater running 350 to 450 HP
with headers, intake and ignition mods along with GOOD TOP LOADER.

$1199 plus S&H

Performance Jet uses only the best
used impellers for refurbishing.
Only one in ten impellers
make it to the work bench.

Berkeley Stuffer Installed.

	This Berkeley G Bowl is being cut to fit a bowl stuffer and a shouldered wear ring. Performance Jet does not move the impeller forward on the shaft like some builders do.