Throughout the years, Performance Jet has accumulated numerous used jet drives and jet drive parts.  When I have the time, during the slow months of the year, I will sometimes spend time cleaning and refurbishing jet parts for resale.  These parts are stripped, primed, repainted and brought back to original spec or better.

In this way, I can provide jet drives and related parts to customers at a reasonable savings.  These parts are limited to stock on hand and at this time I have Berkeley Jets, Panther Jets and Jacuzzi Jets available.  I also have Berkeley 12JC bowls and 12 JG bowls on the shelf.  Drop me a line if you are looking for a savings with used parts or jets.

Jim at work on "The Bench."

• Parts stripped, re-primed and painted.

• Built to Level II specifications.  Radial and Axial clearances set.

• Aggressor A/B aluminum impeller with shouldered wear ring.

• Suction case smoothed, re-primed and painted.

• Front side of bowl sharpened, contoured and Flow coated.

• Low friction graphite packing, Billet impeller nut, tail bearing cone.

Performance Jet uses only the best 
used impellers for refurbishing.  
Only one in ten impellers make it to the work bench.

Berkeley Stuffer Installed.

 
This Berkeley G Bowl is being cut to fit a 
bowl stuffer and a shouldered wear ring.  
Performance Jet does not move the impeller 
forward on the shaft like some builders do.