|
A/T's energizer kit
for the Jacuzzi YJ or Golden Eagle low pressure, axial
flow pump, converts the YJ to a much more efficient
mixed flow pump. This conversion will increase
your pumps performance by approximately 20%. A/T
parts are more available and are cheaper than Jacuzzi
parts. The energizer kits will also allow for the use of
other speed parts like wedges, snoots, diverters, and HD
impellers and shafts. Kits come in white only.
A/T's WJ kit will
improve your Jacuzzi WJ jet by approximately 10%.
WJ Energizer
Kit Complete
|
$1699.00
|
| Have your jet
energized by Performance Jet |
$1999.00 |
|
|
YJ Energizer
Kit Complete
|
$1795.00
|
| Have your jet
energized by Performance Jet |
$2145.00 |
|
PANTHER
ENERGIZER KIT
The
New Panther Jet Drive Energizer Kit from American
Turbine
For
you Panther Jet Drive owners who want to convert your
axial flow Panther Jet to a dual flow A/T Jet Drive.
This kit provides all of the necessary parts to convert
your Panther Jet, utilizing only the Panther Jet suction
case. In preliminary tests, the conversion
provides similar or increased speeds and performance
with a drop in RPM throughout the power band.
With
this kit, Panther Jet Drive owners will now have the
advantage of different impeller options, High
Performance pump shafts, higher flowing bowls and nozzle
diverter assemblies with a greater range of travel.
| PERFORMANCE JET
SALE |
|
| Complete Kit |
$2150.00 |
| Have your
Panther Jet Energized by Performance Jet |
$2495.00 |
|
Add-on Options to
the A/T Energizer Kits
| Manual diverter
A/T RA 8507 (no cable or shift) |
$415.00 |
| Hydraulic
diverter RA 8707 |
$749.00 |
| A/T Snoot R
6301 |
$179.00 |
| A/T long
straight snoot R 6201 |
$199.00 |
| Berkeley Style
Snoot R 6007 |
$225.00 |
| Stainless Steel
Impeller |
$499.00 |
|
|
WJ Level II
plus blueprints by Performance Jet w/o energizer
kit |
$1425.00 |
|
This build includes
new bearing, seals, impeller and ring. The intake
housing is smoothed, re-primed, and painted. The
Jacuzzi impeller is hand finished and balance checked.
The bowl is sharpened, contoured, and smoothed, then
finished with a flow coat. The small outlet nozzle
on the bowl is cut off, enlarging the discharge from
3.250 inches to 4.50 inches and a standard Berkeley
style nozzle housing is installed on the bowl
allowing the use of most trim diverters. HD
impellers are not available for the WJ.
|
